911@eegrestore.com Call for Free Estimate : 321-361-4044
CONTACT US    866.334.9111

Floor Cleaning FAQ

How often should you get your carpet cleaned? In the average household, vacuuming should be done at least twice a week. Now here’s the surprising bit of advice. If you want to extend the life of your carpet, it is important to have it professionally cleaned at least once a year. According to Carter, most carpet manufacturers recommend the steam cleaning method.Jun 8, 2015
It’s inevitable; stuff spills or you track in mud by mistake on a rainy afternoon. Here are some homemade carpet cleaning products you might have at home:
  1. Small spray bottle.
  2. 1 teaspoon dishwashing liquid.
  3. 1 tablespoon white vinegar.
  4. 1 cup warm water.
  5. 1 teaspoon baking soda.
  6. Clean absorbent towel.
  7. Clean sponge.
Directions:
  1. Gather the ingredients to make your carpet cleaner. Along with being an amazing concoction, vinegar and baking soda put on quite a show when mixed. Vinegar is an acid, and baking soda is a base, so when the two mix together, they create carbon dioxide, which results in lots and lots of cleaning bubbles. Add the dishwashing liquid to the spray bottle along with vinegar, and then top with the warm water. Working over a sink, with the top of the spray bottle close at hand, add the baking soda, and then quickly screw on the top of the spray bottle.
  2. Vacuum over the area and then wipe gently with the abrasive side of a sponge.
  3. Spray the soiled area generously with the carpet cleaner, and then gently rub and dab with the towel. You should start to see cleaning results right away.
  4. Continue dabbing and wiping with the towel to absorb the water and completely remove the stain.
Commercial Carpet cleaning is the method we use for cleaning is hot water extraction, commonly referred to as steam cleaning. … Hot, soft water and a specially formulated cleaning solution are injected deep into the carpet fibers. Then, a powerful suction extracts deep-down dirt, allergens, cleaning solution and 95% of the moisture. Call us today for free estimate.
Vacuum before cleaning? A light vacuuming in the traffic areas is recommended before cleaning your carpet with any other product. If needed, our crew can pre-vacuum the area to be cleaned. Also, the equipment is vacuuming the entire time we are cleaning. For estimates click here 
The question, How long will it take to clean my carpets? has a variable answer. On average, it will take approximately 20 minutes per room. This time can vary greatly depending on the amount of furniture to be moved, how soiled the carpet is, and any necessary spot removal treatments.
Carpet cleaning estimates will vary depending on the size of the area. Typically, an area is a room that is up to 300 square feet (that is 15 x 20 or approximately the size of a two-car garage). Living room/dining room combos are considered two areas. Any area over 300 square feet but less than 600 square feet is priced as two areas. Non-standard areas (baths, halls, landings, walk-in-closets, etc.) are priced separately from the standard areas, usually at a lesser price. Please know that these room sizes may vary by location.
Dry time is affected by humidity, temperature, and air flow to the area. It can take anywhere between 8-24 hours for the carpet to completely dry, depending on the aforementioned variables. Using fans in any rooms cleaned and turning your air conditioning or heating system on, depending on the time of year, can help accelerate drying time. Be sure to leave the protective blocks under furniture legs and any paper used with upholstered items in place until the carpet and/or furniture is completely dry to avoid any color transfer. You may walk on your carpet immediately after cleaning, but avoid wearing street shoes, as they may re-soil your carpet. We suggest wearing clean rubber-soled shoes. Be especially careful when walking from damp, carpeted areas on to non-carpeted areas to avoid slipping.
There are no unique answers for “Best Carpet Cleaning Method“, however the method we use for carpet cleaning is hot water extraction, commonly referred to as steam cleaning. Hot water extraction method removes the toughest, deepest dirt safely and gently. Hot, soft water and a specially formulated cleaning solution are injected deep into the carpet fibers. Then, a powerful suction extracts deep-down dirt, allergens, cleaning solution and 95% of the moisture. It’s the cleaning method most recommended by carpet manufacturers.

Load More

Seal grout: Clean Dingy Grout. Clean the entire floor as you normally would and remove any loose dirt and dust. If your grout has an old, worn coating of grout sealer that still causes water to bead up, use a flooring finish stripper to remove it from the surface. Rinse the floor with clean water and allow it to dry.
if you need to know what is a clear seal, read the following: a clear seal is an invisible layer of protection that penetrates into the pores of the grout. This gives you more time to clean up dirt and liquid spills before they soak into the grout, however, it is not waterproof. Give us a call today.
To clean tile and growth you need to implement various processes. It is simpler if you call the experts. We use a high-pressure rotary tool with dual rotating jets. This is combined with the same truck-mounted steam/pressure cleaning we use to deep clean your carpet. We use tile and grout specific cleaners that strip away any waxy build-up and remove the dirt embedded in the grout lines. Give us a call.
Just like carpet, dirt builds up over time dulling your tile’s appearance and discoloring your grout. A thorough, professional tile & grout cleaning is the only way to remove the deep-down dirt.
Rather than suffering through dealing with unattractive dark lines between your tiles, you can take action to change the color of your grout. Although neither is especially timely, you can choose to stain your grout or to give it a deep-cleaning. Give us a call.
You should have your grout lines sealed because this material is porous. It absorbs soil and spills, just like carpet. Having a sealant applied will help create a protective barrier, giving you more time to clean up dirt and liquid spills before they soak into the grout. The type of sealant you choose will determine the degree of stain resistance. Click here and ask for our estimates.

Load More

 

Do you have any other question? We’re here for you!

(866) 334-9111

©2017 EEG Clean. All Rights Reserved